SARIX Micro 3D EDM Technology

  • 3D Micro Milling of complex forms with radius corner’s down to 3μm (.00012”) and bottom floor level control to 2μm (.0008”)
  • Drill holes of 0.1mm diameter to 15mm deep with +/- 5μm (.0002”) tolerance
  • Reach machining features of 10μm (.0004”) with an Ra of 0.05μm
  • A wire-dressing option allows for electrode diameters as small as 0.015mm
  • Electrode collets available in the manual or automatic feed, as well as electrode rotation indexing collets for dressing electrode shapes/geometries
  • Straight Hole Deviation below 5μm
  • Hole depth/diameter ratio up to 150:1
  • 3D Micro Milling and Drilling configurations available in enclosed or table-top machines

Click here for an informational chart, and here for the Sarix page on our website.

We will remain open to ship tooling to all clients during this difficult time and ensure our team is practicing the utmost hygienic measures. We thank you for your continued business and wish you and your families good health!

Alouette Tool Co
Your Swiss Turn Tooling Specialists