Our Blog
News | ResourcesNew ISO Inserts from BIMU!
ISO line Perfectly controlled cutting and excellent surface finish thanks to Wiper geometry and the new chip breaker.VCGT ISO Turning Insert Key benefits Compatible with your existing tool holders. Excellent machining results in nickel alloys such as Inconel as...
MicroTurn eLine
The eLine belongs to the MicroTurn portfolio and is fully compatible with the existing holders and clamping system. The new universal tools with a positive rake angle complete some gaps in the inner diameters and are positioned in the middle of the MTEC/MTEN...
Swiss Nano Users – We’ve Got You Covered!
Standard tool holders remain unchanged (brazed tools, PCD, inserts of any kind) Addition of 4 turning tools instead of drilling tools. Standard tool holders are replaced by double tool holders, which adds 3 turning tools. Increased precision for...
SARIX MICRO 3D EDM TECHNOLOGY
SARIX Micro 3D EDM Technology 3D Micro Milling of complex forms with radius corner’s down to 3μm (.00012”) and bottom floor level control to 2μm (.0008”) Drill holes of 0.1mm diameter to 15mm deep with +/- 5μm (.0002”) tolerance Reach machining features of 10μm...